|
Once mounted, this new component will improve your vehicle’s appearance, ensure greater stability, and increase manageability on and off-road.
It will also allow non-interference of extra large tires on the vehicle’s suspension parts.
The kit consists of:
- four /4/ spacers with studs already mounted.
- conical threaded nuts for each stud.
- remove wheel.
- thoroughly clean the wheel hub and all surfaces which will support the spacer and the stud threads.
- mount the spacer as if it was the wheel.
- apply the kit’s threaded, conical nuts, tightening with a torque wrench, adding +10% with respect to the recommended tightening torque.
- using graphite grease, lightly lubricate the studs.
- clean the hub of the wheel rim which mates with the spacer.
- after tightening the wheel nuts on the threaded spacer, re-mount the wheel in accordance with the original, recommended torque wrench values.
Done!
|
